Skip to content

Language

iFlight BLITZ F7 Pro Flight Controller w/ 35x35mm Mount Hole

by iFlight
Original price €0,00 - Original price €0,00
Original price €0,00
€145,99
€145,99 - €145,99
Current price €145,99

free return

Do you live in Belgium or The Netherlands? Then you can return your package for free!

In stock at supplier
Description
Characteristics
  • Improved circuit design, better components and less electrical noise!
  • DJI HD VTX connector (Plug-and-Play / no soldering required)
  • FC indicator LEDs for visual troubleshooting
  • Black Box van 512 MB
  • Met LC-filter
Mounting pattern 35*35mm/ 4mm PCB gat diameter
Smartaudio / IRC Tramp VTX protocol Supported
Firmware target IFLIGHT_BLITZ_F7_PRO
Input voltage 14.8V-34V (4S-8S LIPO)
Engine outputs 4x (SH1.25 connector)
flash memory 512MB (Blackbox flash)
I2C serial SDA / SLA pads
Dimensions 41*41.5mm
Barometer DPS310
OSD Chip AT7456E
LED controller And
MCU STM32 F722
Weight 17g (±2)
Beeper pad And
Gyro BMI270
UARTS 6


Wiring suggestion

  • UART1 for VTX HD/Analog
  • UART2 for receiver
  • UART4 for GPS
  • UART5 for ESC telemetry
  • 8×Dshot/PWM outputs
  • 1×I2C for GPS Mag


Tips

  • 1. F722 MCU has an internal inverter.
  • 2. SBUS、CRSF、ELRS、IBUS、DSM ETC... can be connected to any unused UART_RX, we suggest you connect to Uart_RX2
  • 3. Frsky SmartPort, Tramp & Smartaudio can be connected to any unused UART_TX, we suggest you connect to Uart_TX1
  • 4. F.port can be connected to any unused UART_TX, we suggest you connect to Uart_TX2


Supplied connectors (Plug-and-Play harness)

  • 1xGH1.25 7-pin connector for HD VTX/Analog VTX (RX2/GND/RX1/TX1/GND/+12V/Video out)
  • 1xGH1.25 8pin connector for ESC1 (GND/VBAT/M1/M2/M3/M4/CUR/RX5)
  • 1xGH1.25 8pin connector for ESC2 (GND/VBAT/M5/M6/M7/M8/CUR/RX5)
  • 1xGH1.25 4pin connector voor GPS&Mag(+5V/GND/TX4/RX4/SDA/SCL)
  • 1xGH1.25 3pin connector for analog camera (Video in/GND/+5V)
  • 1xGH1.25 4-pin connector for each receiver (GND/+5V/RX2/TX2)
  • 1xGH1.25 4pin connector voor LED&Beeper(LED/BZ-/+5V/GND)


What's in the package

  • 1 Piece BLITZ F7 Pro Flight Controller
  • 1 set of FC connectors (as above)
  • 1 set of silicone grommets