Amewi AFX4 Single-Rotor FP Helicopter PNP
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Description
PNP
The AFX4 Single-Rotor comes with all the electronics needed to operate the helicopter. All you need to do is install the batteries. Batteries for the remote control are not included and must be provided by you.
Overview
The AFX4 is a great introduction to the world of helicopter flying - thanks to its inherently stable flying characteristics, this model is also suitable for transitioning from coaxial helicopters. Delivered with the standard Mode 2 assignment (throttle left), most pilots do not need to change their habits. With the integrated 6-axis gyro and the servo travel limit, this single-rotor is very easy to control and allows for stable hovering. The model is also self-stabilizing. The radio remote control has an extra button to bring the helicopter back to a stable starting position if needed (hover mode). The pitch and roll movements (forward/backward, right/left) are regulated in such a way that they do not pose major problems for a beginner pilot. If a bit more power is needed, for example outside in strong winds, a dual-rate switch on the transmitter provides more servo travel as a backup. With a little practice, the AFX4 can be moved smoothly and quickly, making it ideal as a training model for smaller spaces or halls. The flight time is up to 15 minutes.
Characteristics
- PNP version incl. remote control, battery, charging cable
- 6-axis gyro
- Electronic stabilization
- Hover stabilization at the push of a button
- Very good gliding properties
- Long flight times of up to 15 minutes
- Inherently stable to fly and therefore particularly suitable for beginners
- Very quiet
| Total length | ca. 268 mm |
| Main rotor diameter | ca. 249 mm |
| Width (landing gear) | ca. 50 mm |
| Width (cockpit) | ca. 38 mm |
| Height | ca. 80 mm |
| Weight incl. battery | 51 g |
| Accu | LiPo 3.7V 350mAh, 25C Molex connector, 37x19x8 mm, 10 g |
| Flight time | total 15 minutes |
| Remote control | 2,4 GHz |
| Reach | approx. 120 m |
| Charging cable | USB |
| Charging time | approx. 90 minutes |
What is included
- Model
- Remote control
- Rechargeable battery
- Charging cable
- Allen key
- Reserve connection terminal
- Reserve tail rotor blade
- Reserve main rotors
- Screwdriver
- Instructions for use DE/EN
What else is needed
- 6x 1.5V AA batteries for the remote control
