Castle Creations 2028-800KV 4-Pole 6.5mm Bullets Sensored Brushless Motor
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Description
Overview
The Castle Creations CC060-0083-00 is a powerful 2028-800KV 4-pole sensored brushless inrunner motor, developed for large 1/6-scale RC vehicles weighing up to 25 lb (11.34 kg). This version of the 2028-800KV features pre-installed 6.5 mm bullet connectors and 10 AWG wiring and is suitable for up to 8S LiPo. The improved 4-pole, 12-slot design is engineered for high efficiency and lower heat generation during extended use. The motor supports both sensored and sensorless operation and features high-quality neodymium magnets, a Kevlar-reinforced rotor, oversized NMB bearings, and a vibration-damping system.
Features
- 2028-800KV 4-pole sensored brushless inrunner motor
- Specifically developed for large 1/6-scale RC vehicles
- Suitable for up to 8S LiPo
- Improved 4-pole, 12-slot motor design
- Designed for high efficiency and lower heat generation
- Sensored and sensorless operating modes
- Pre-installed 6.5 mm male bullet connectors
- 10 AWG pre-installed silicone wiring
- High-strength, heat-resistant sintered neodymium magnets
- Kevlar-reinforced rotor for extra strength at high RPM
- Oversized NMB bearings for a long service life
- Vibration-damping system
- Low stator winding resistance for efficient operation
- Two sensor connections for flexible installation
- Water-resistant motor design
- Designed for vehicles weighing up to 25 lb (11.34 kg)
- Suitable for use with the Castle Mamba Monster X 8S
| Brand | Castle Creations |
| Product type | Sensored Brushless Inrunner Motor |
| Motor series | 2028 |
| KV rating | 800KV |
| Poles | 4-pole |
| Slot configuration | 12-slot |
| Operating modes | Sensored and sensorless |
| Maximum input voltage | 8S LiPo |
| Minimum input voltage | 3S |
| Recommended scale | 1/6 |
| Maximum recommended vehicle weight | 25 lb / approx. 11.34 kg |
| Maximum RPM | 45,000 RPM |
| Motor length | 112.7 mm / 4.4" |
| Motor diameter | 56.3 mm / 2.2" |
| Motor weight including wiring | 1.25 kg / 44 oz |
| Shaft diameter | 8 mm |
| Shaft length | 30 mm |
| Mounting holes | 4 mm @ 30 mm |
| Motor connectors | 6.5 mm male bullet |
| Wiring | 10 AWG |
| Sensor cable | 250 mm |
| Sensor connections | 2 |
| Cooling fan | Available as an accessory, not included |
| Water-resistant | Yes |
| Recommended ESC | Castle Mamba Monster X 8S |
| Combo motor part | 010-0165-01 Mamba Monster X 8S combo |