iFlight iPower GM2804 Gimbal Motor
by iFlight
Original price
€0,00
-
Original price
€0,00
Original price
€0,00
€45,99
€45,99
-
€45,99
Current price
€45,99
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
In stock at supplier
Description
Description
- The controller can be used to build high performance 3-axis camera stabilization systems that can be mounted on UAV and to build portable camera stabilizers.
- This version of the controller is our new direction in the development of the stabilizing solutions. It replaces the previous 8-bit version of the SimpleBGC controller, keeping 100% back compatibility but adding the new functionality.
| Model | GM2804 |
| Engine Outer Diameter | Ф35±0.05mm |
| Engine Height | 15±0.2mm |
| Hollow Shaft(OD) | F8-0.008/-0.012mm |
| Hollow Shaft(ID) | F6.5+0.05/0mm |
| Wire length | 60±3mm |
| AWG cable | #24 |
| engine weight | 42.3±0.2g |
| Wire Connector | PH3P connector |
| No load current | 10V 0.09±0.05A 1602~1771 RPM |
| Load current | 10V 0.8A 250-350g |
| Motor internal resistance | 9Ω±5%（Resistance varies with temperature） |
| High voltage test | DC500V 1mA @2sec |
| Rotorhuis runout | ≤0.1mm |
| Steering direction (axle extension) | clockwise |
| High-low temperature test | |
| High temperature | Hold 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature |
| Low temperature | Hold -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature |
| Maximum power | ≤25W |
| Work flow | 2-3S |
| Working temperature | -20~60℃;10~90%RH |