MJX Hyper Go TX14 brushless 4WD truggy 1/14 PNP
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Description
Overview
The Hyper GO TX14 1:14 Truggy is a powerful RTR 4WD brushless RC truck, designed for both beginners (14+) and experienced drivers. Powered by a 4200KV brushless motor and a 50A ESC, it quickly reaches speeds of over 53 km/h, with an adjustable speed control for easy learning. It features a durable metal drivetrain, CVD axles, ball bearings, oil-filled shock absorbers, and waterproof electronics for reliable off-road performance.
With a 2.4 GHz radio system, a 7.4V 3000mAh LiPo battery, charger, two bodies, and additional accessories, the TX14 is ready to use straight out of the box and offers powerful performance, durability, and versatility.
Features
- Set includes remote control, battery, and charging cable
- Switchable, bright front LED lighting
- Metal protective plates (underbody chassis reinforcement, front/rear)
- Solid composite front and rear wheel hubs
- New 50A V2 brushless controller for precise control
- New 2852 brushless motor with 4200 kV
- Adjustable oil-filled shock absorbers
- Adjustable suspension (camber and track width)
- Fully ball-bearing equipped
- 4WD drive
- New 2.4 GHz remote control with dual rate (speed and travel limit) for throttle and steering, and a reverse function for throttle and steering
- New standard-size digital steering servo
- Waterproof RC enclosure
- Compatible with 2S & 3S LiPo batteries
- Includes large 2S 7.4V 3000mAh battery
- Top speed of over 53 km/h
| Scale | 1:14 |
| Length | 330 mm |
| Width | 220 mm |
| Height | 130 mm |
| Weight | 1590 g |
| Wheelbase | 200 mm |
| Front track width | 190 mm |
| Rear track width | 190 mm |
| Ground clearance | 30 mm |
| Front wheels | Ø 90 mm / width 43 mm |
| Rear wheels | Ø 90 mm / width 43 mm |
| Wheel diameter | 56 mm |
| Gearbox | Metal |
| Front shock absorbers | 68 mm |
| Rear shock absorbers | 70 mm |
| Brakes | Electronic |
| ESC | Brushless 50A |
| Motor | Brushless 2852 4200KV |
| Drivetrain | Driveshaft (metal) |
| Steering servo | Standard digital servo |
| Chassis material | Composite plastic |
| Battery compartment | 98 × 40 × 25 mm |
| Battery | LiPo 2S 7.4 V 3000 mAh 25C soft case, Deans connector, 93 × 34 × 22 mm, 147 g |
| Battery compatibility | 2S & 3S LiPo |
| Run time | 12–15 min (depending on surface) |
| Top speed | > 53 km/h (with 2S LiPo) |
| Remote control | 3 channels, 2.4 GHz |
| Range | approx. 100 m |
| Charger | USB balance charging cable, 7.4 V 1.5 A |
| Charging time | approx. 150–180 min |
What's included
- RC car
- 2x body shells
- Remote control
- Rechargeable battery
- Charging cable
- Accessories/parts
- Tools
Required to complete
- 4x 1.5V AA batteries for the remote control