iFlight iPower GM110-8/GM110-10 Gimbal Motor
by iFlight
Original price
€0,00
-
Original price
€0,00
Original price
€0,00
€237,99
€237,99
-
€263,99
Current price
€237,99
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
in stock, ready to be shipped
in stock, ready to be shipped
Description
Description
Characteristics
- The principle of camera stabilization using direct drive brushless motors. In fact, the gimbal based on BLDC motors is very similar to the common gimbal based on hobby servo.
- Specially designed for SLR antenna and Z axis DIY parts
Characteristics
- Sealed housing to prevent contamination from dust and dirt.
- Hollow shaft for slip ring
- Configuration: 24N28P (GM110-8) / 36N42P (GM110-10, more torque.
| Model | GM110-8 |
| Engine outer diameter | Ф110±0.05mm |
| Engine height | 26±0.2mm (including encoder housing) |
| Hollow shaft (OD) | N/A |
| Hollow axis (ID) | N/A |
| Wire length | 610±3mm |
| AWG cable | #24 |
| weight engine | 534±1g |
| Wire plug | 2.5mm dupont-connector |
| No load current | 20V |
| No load voltage | 0.09±0.1 A |
| No load RPM | 125~139 RPM |
| Load current | 20V |
| Load voltage | 2a |
| Tax torque | 8000-12000 g |
| Internal resistance motor | 20.19Ω±5% (resistance varies with temperature) |
| High voltage test | DC500V 1mA @2sec |
| Rotor housing spout | ≤0.1mm |
| Steering (shaft extension) | clockwise |
| High-low temperature test | |
| High temperature | 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature |
| Low temperature | -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature |
| Maximum power | ≤60W |
| Working current | 4-6S |
| Working temperature | -20~60℃;10~90%RH |
| Model | GM110-10 |
| Engine Outer Diameter | Ф110±0.05mm |
| Engine Height | 26±0.2mm (Including Encoder Housing) |
| Hollow Shaft (Outside Diameter) | Ф25-0.008/-0.012 mm |
| Hollow Shaft (Inner Diameter) | Ф22+0.05/+0.1 mm |
| Wire length | 610±3mm |
| AWG cable | #24 |
| engine weight | 532±1g |
| Wire Connector | 2.5mm dupont connector |
| No Load Current | 20V |
| No Load Voltage | 0.16±0.1 A |
| No Load RPM | 292~323 RPM |
| Load Current | 20V |
| Load Voltage | 2a |
| Tax Torque | 9000-15000 g |
| Motor Internal Resistance | 4.16Ω±5% (Resistance varies with temperature) |
| Voltage Test (High Voltage) | DC500V 1mA @2sec |
| Rotor housing Spout | ≤0.1mm |
| Rotation direction (Axis extension) | Clockwise |
| High-Low Temperature Test | |
| High Temperature | Remains at 60℃ for 100 hours, and the motor works normally after 24 hours at room temperature |
| Low temperature | Remains at -20℃ for 100 hours, and the motor works normally after 24 hours at room temperature |
| Maximum power | ≤80W |
| Work flow | 4-6S |
| Working temperature | -20~60℃;10~90%RH |