iFlight iPower GM8112-80T Gimbal Motor w/ Alexmos 32BIT BGC set
by iFlight
Original price
€0,00
-
Original price
€0,00
Original price
€0,00
€814,99
€814,99
-
€814,99
Current price
€814,99
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
in stock, ready to be shipped
Description
Description
- The controller can be used to build high performance 3-axis camera stabilization systems that can be mounted on UAV and to build portable camera stabilizers. This version of the controller is our new direction in the development of the stabilizing solutions. It replaces the previous 8-bit version of the SimpleBGC controller, keeping 100% backward compatibility, but adding the new functionality.
- The GM8112 motor from iPower Motors is the ultimate brushless gimbal motor for Red Epic / Large Cameras. This motor is designed for large-scale multi-rotor platforms that want to lift Red Epic and DSLR sized gears - 6 kg/cm of torque. The principle of camera stabilization using direct drive brushless motors. In fact, the gimbal based on BLDC motors is very similar to the common gimbal based on hobby servo.
- Board size: 50×50 mm
- The distance between the mounting holes: 45mm
- The diameter of the mounting holes: 3mm
- Supply voltage: 3S to 6S
- Maximum motor current: 1.5 A
- 5V output current to power external devices: up to 1 A
| Model | GM8112 |
| Motor Out Diameter | Ф89.5±0.05mm |
| Motor Height | 26±0.2mm (Including Encoder Housing) |
| Hollow Shaft(OD) | Ф25-0.008/-0.012 mm |
| Hollow Shaft(ID) | Ф22+0.05/+0.1 mm |
| Wire Length | 610±3mm |
| Cable AWG | #24 |
| Motor Weight | 428±1g |
| Wire plug | 2.5mm dupont connector |
| No-load current | 22V |
| No-load volts | 0.3±0.1 A |
| No-load Rpm | 380~420 RPM |
| Load current | 20V |
| Load volts | 2a |
| Load torque(g) | 6000-9000 |
| Motor internal resistance | 4.2Ω±5% (resistance varies with temperature) |
| High voltage test | DC500V 1mA @2sec |
| Rotor housing runout | ≤0.1mm |
| Steering (axle extension) | clockwise |
| High-low temperature test | |
| High temperature | Keep it at 60°C for 100 hours and the motor can work normally after 24 hours at room temperature |
| Low temperature | Keep it at -20°C for 100 hours and the motor can work normally after 24 hours at room temperature |
| Maximum power | ≤80W |
| Working current | 3-5S |
| Working temperature | -20~60℃;10~90%RH |
What is included
- 3 x GM8112 cardanische motor
- 1 x Alexmos 32BIT BGC kit without alum case
- 1x Set of connection cables