iFlight iPower GM8112-80T Gimbal Motor w/ AS5048A Encoder
by iFlight
Sold out
Original price
€0,00
-
Original price
€0,00
Original price
€0,00
€238,99
€238,99
-
€263,99
Current price
€238,99
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Out of stock
Out of stock
Out of stock
Description
Description
- The GM8112 motor from iPower Motors is the ultimate brushless gimbal motor for Red Epic / Large Cameras. This motor is designed for large-scale multi-rotor platforms that want to lift Red Epic and DSLR sized gears - 6 kg/cm of torque. The principle of camera stabilization using direct drive brushless motors. In fact, the gimbal based on BLDC motors is very similar to the common gimbal based on hobby servo.
| Model | GM8112 |
| Motor Out Diameter | Ф89.5±0.05mm |
| Motor Height | 33.4±0.2mm (Including Encoder Housing) |
| Hollow Shaft(OD) | Ф25-0.008/-0.012 mm |
| Hollow Shaft(ID) | Ф22+0.05/+0.1 mm |
| Wire Length | 610±3mm |
| AWG cable | #24 |
| engine weight | 446±1g |
| Wire Connector | 2.5mm dupont connector |
| No Load Current | 22V |
| No Load Voltage | 0.3±0.1 A |
| No Load Rpm | 380~420 RPM |
| Load Current | 20V |
| Load Voltage | 2a |
| Load Torque(g) | 6000-9000 |
| Motor Internal Resistance | 4.2Ω±5% (Resistance varies with temperature) |
| High Voltage Test | DC500V 1mA @2sec |
| Rotor housing Eccentricity | ≤0.1mm |
| Steering (shaft extension) | clockwise |
| High-low temperature test | |
| High temperature | Store at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature |
| Low temperature | Store at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature |
| Maximum Power | ≤80W |
| Work flow | 3-5S |
| Working temperature | -20~60℃;10~90%RH |