MJX Hyper Go MTX18 2-in-1 Monster Truck/Truggy 4WD 1/18 RTR
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Description
Overview
The 1/18 scale MJX Hyper Go MTX18 is two cars in one: it comes with two bodies, so you can drive it as a compact monster truck or an agile truggy. The quick-release system lets you swap them in seconds. The 4WD drivetrain uses metal components, metal CVD drive shafts and metal differentials front and rear, and it is fully ball-bearing equipped. Oil-filled shocks and treaded rubber tires keep it under control on rough terrain, and it reaches speeds of over 30 km/h.
The 2-in-1 receiver/ESC protects against low voltage, stalling and overheating, while a splash guard keeps dirt away from the electronics. The set is Ready To Run with a transmitter, two 1500mAh Li-ion batteries and a charger; you only need 4 AA batteries for the transmitter.
Features
- 2-in-1: monster truck and truggy bodies included
- Metal drivetrain components and metal CVD drive shafts
- Metal differentials front and rear
- Fully ball-bearing equipped
- Oil-filled shocks and treaded rubber tires
- 2-in-1 receiver/ESC with protection against low voltage, stalling and overheating
- Two 1500mAh batteries included in hard cases
- Quick-release body, splash guard, top speed 30+ km/h
| Brand | MJX |
| Product code | 22754 (Amewi) |
| Model | Hyper Go MTX18 2-in-1 |
| Scale | 1/18 |
| Drive | 4WD (metal drive shaft) |
| Dimensions (L × W × H) | 273 × 210 × 115 mm (truggy 109 mm high) |
| Wheelbase | 160 mm |
| Track width | 163 mm |
| Ground clearance | Approx. 30 mm |
| Tire size | 77 × 40 mm, 45 mm rim |
| Weight | 921 g (incl. battery) |
| Motor | P18138S brushed |
| Receiver/ESC | 2-in-1 receiver/brushed ESC 30A |
| Transmission | Metal gears and differentials |
| Steering servo | 17 g |
| Shock absorbers | 59 mm, oil-filled |
| Transmitter | T3E, 3 channels |
| Radio frequency | 2.4GHz |
| Transmitter range | Approx. 80-100 m |
| Top speed | 30+ km/h |
| Battery | 2x Li-ion 2S 7.4V 1500mAh, hard case, Deans/T-plug (included) |
| Charger | USB balance charger, charging time approx. 120-180 minutes |
| Estimated runtime | 7-8 minutes per battery |
| Required | 4x AA batteries (transmitter) |
Package contents
- 1 x Hyper Go MTX18
- 1 x Transmitter
- 2 x Batteries
- 2 x Bodies (monster truck and truggy)
- 1 x Charger
- 1 x Tool
- 1 x Manual (DE/EN)
Frequently bought together