GEPRC Cinelog30 V3 O4 Air Unit PRO Freestyle FPV Drone BNF
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Description
BNF
The Cinelog30 V3 O4 Air Unit comes without a transmitter and batteries, while the WTFPV version does not include a transmitter, VTX, camera, or antennas for the drone.
Overview
The Cinelog30 V3 is equipped with the O4 Air Unit PRO VTX, which delivers exceptional image quality, color accuracy, and detail through its advanced processor. The reinforced aluminum frame and enclosed electronics compartment provide enhanced durability and protection for internal components, with dustproof connectors and a canopy for additional protection. The rear-mounted PDB ensures tidy wiring and a streamlined layout. Powered by a TAKER F722 45A 32-bit AIO, 1404 3850KV motors, HQprop DT76mm x3 props, and a LiHV 4S 720mAh battery, it delivers a flight time of up to 8 minutes and 10 seconds. The Cinelog30 V3 is optimized for stable, cinematic footage, making it ideal for professional aerial videography.
Features
- Equipped with the latest O4 Air Unit PRO, offering sharp details, high resolution, and excellent low-light performance.
- Refined frame with an enclosed design for improved protection of electronic components.
- Aluminum-reinforced front section and protective frame for added strength.
- Slim front section to protect the O4 Air Unit PRO lens from impacts.
- Dustproof data-port connectors to prevent dirt during takeoff and landing.
- Custom PDB with receiver, buzzer, LED BEC, TVS, and anti-spark functions.
- Underslung gimbal mount in the Cinelog series for stable, smooth footage with the O4 Air Unit PRO.
- Precisely tuned PID settings by the GEPRC team for ultra-smooth, responsive flight control.
Cinelog30 V3 O4 Pro
| Model | Cinelog30 V3 O4 Pro Quadcopter |
| Frame model | GEP-CL30 V3 |
| Carbon plate thickness | 2.5mm |
| Wheelbase | 128mm |
| Flight controller | TAKER F722 45A 32Bit AIO |
| MCU | STM32F722RET6 |
| Gyro | ICM 42688-P |
| FC firmware | GEPRC_F722_AIO |
| Flash | 16MB |
| ESC | 32Bit 45A |
| Motor | SPEEDX2 1404 3850KV |
| Propeller | HQprop DT76mmx3 V2 |
| Battery connector | XT30 |
| VTX | O4 AIR Unit Pro |
| Camera | O4 |
| Antenna | O4 original |
| Receiver | PNP (built-in) / ELRS2.4G / TBS NanoRX |
| Weight (TBS NanoRX version) | 187 ± 2g |
| Recommended battery | LiHV 4S 660–720mAh |
| Flight time | 8 minutes 10 seconds (gentle flying) |
Cinelog30 V3 WTFPV
| Model | Cinelog30 V3 WTFPV Quadcopter |
| Frame model | GEP-CL30 V3 |
| Carbon plate thickness | 2.5mm |
| Wheelbase | 128mm |
| Flight controller | TAKER F722 45A 32Bit AIO |
| MCU | STM32F722RET6 |
| Gyro | ICM 42688-P |
| FC firmware | GEPRC_F722_AIO |
| Flash | 16MB |
| ESC | 32Bit 45A |
| Motor | SPEEDX2 1404 3850KV |
| Propeller | HQprop DT76mmx3 V2 |
| Battery connector | XT30 |
| VTX | None |
| Camera | None |
| Antenna | None |
| Receiver | PNP (digital built-in) / ELRS2.4G / TBS NanoRX |
| Weight (TBS NanoRX version) | 148 ± 2g |
| Recommended battery | LiHV 4S 660–720mAh |
What’s included
- 1 x Cinelog30 V3
- 1 x Protective frame (transparent black)
- 2 x HQprop DT76mmx3 V2 (pair)
- 1 x 15*150 mm battery strap
- 1 x L-shaped screwdriver, 1.5 mm
- 1 x Gray canopy
- 1 x Black canopy
- 1 x Spare screw set
- 1 x Non-slip battery pad
- 1 x Damping ball puncher
- 1 x Ejector pin for frequency coupling
Spare screws included
- 1 x M2 rivet nut
- 4 x M2*4.5 button-head hex socket screw
- 4 x M2*6 button-head hex socket screw
- 4 x M2*4 button-head hex socket screw
- 1 x M2*12 button-head screw
- 2 x damping balls