iFlight iPower GM110-8/GM110-10 Gimbal Motor
by iFlight
Original price
€0,00
-
Original price
€0,00
Original price
€0,00
€237,99
€237,99
-
€263,99
Current price
€237,99
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
In stock at supplier
In stock at supplier
Description
Description
Characteristics
- The principle of camera stabilization using direct drive brushless motors. In fact, the gimbal based on BLDC motors is very similar to the common gimbal based on hobby servo.
- Specially designed for SLR antenna and Z axis DIY parts
Characteristics
- Sealed housing to prevent contamination from dust and dirt.
- Hollow shaft for slip ring
- Configuration: 24N28P (GM110-8) / 36N42P (GM110-10, more torque.
| Model | GM110-8 |
| Engine outer diameter | Ф110±0.05mm |
| Engine height | 26±0.2mm (including encoder housing) |
| Hollow shaft (OD) | N/A |
| Hollow axis (ID) | N/A |
| Wire length | 610±3mm |
| AWG cable | #24 |
| weight engine | 534±1g |
| Wire plug | 2.5mm dupont-connector |
| No load current | 20V |
| No load voltage | 0.09±0.1 A |
| No load RPM | 125~139 RPM |
| Load current | 20V |
| Load voltage | 2a |
| Tax torque | 8000-12000 g |
| Internal resistance motor | 20.19Ω±5% (resistance varies with temperature) |
| High voltage test | DC500V 1mA @2sec |
| Rotor housing spout | ≤0.1mm |
| Steering (shaft extension) | clockwise |
| High-low temperature test | |
| High temperature | 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature |
| Low temperature | -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature |
| Maximum power | ≤60W |
| Working current | 4-6S |
| Working temperature | -20~60℃;10~90%RH |
| Model | GM110-10 |
| Engine Outer Diameter | Ф110±0.05mm |
| Engine Height | 26±0.2mm (Including Encoder Housing) |
| Hollow Shaft (Outside Diameter) | Ф25-0.008/-0.012 mm |
| Hollow Shaft (Inner Diameter) | Ф22+0.05/+0.1 mm |
| Wire length | 610±3mm |
| AWG cable | #24 |
| engine weight | 532±1g |
| Wire Connector | 2.5mm dupont connector |
| No Load Current | 20V |
| No Load Voltage | 0.16±0.1 A |
| No Load RPM | 292~323 RPM |
| Load Current | 20V |
| Load Voltage | 2a |
| Tax Torque | 9000-15000 g |
| Motor Internal Resistance | 4.16Ω±5% (Resistance varies with temperature) |
| Voltage Test (High Voltage) | DC500V 1mA @2sec |
| Rotor housing Spout | ≤0.1mm |
| Rotation direction (Axis extension) | Clockwise |
| High-Low Temperature Test | |
| High Temperature | Remains at 60℃ for 100 hours, and the motor works normally after 24 hours at room temperature |
| Low temperature | Remains at -20℃ for 100 hours, and the motor works normally after 24 hours at room temperature |
| Maximum power | ≤80W |
| Work flow | 4-6S |
| Working temperature | -20~60℃;10~90%RH |