X-601 Coaxial Drone Arm Set (MN601-S KV170, Alpha 60A HV ESC, P20x6 Prop)
by T-Motor
Original price
€0,00
-
Original price
€0,00
Original price
€0,00
€662,99
€662,99
-
€805,99
Current price
€662,99
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
In stock at supplier
In stock at supplier
Description
| Engine Dimension | ⌀68.8*34.9mm | Stator | Imported silicone steel plate, anti-rust treatment, 150°C heat-resistant coatings |
| Configuration | 24N28P | Shaft Diameter | IN: 6mm, OUT: 6mm |
| Lower | Imported 626ZZ | Magnet level | 150°C heat resistance |
| Conduit cable | 16AWG*150mm | Copper wire | 180°C heat resistance: Level H |
| Coil Insulation Test | 500V | Centrifugal Cooling Design | Yes |
| Rotor Dynamic Balance Standard | ≤5Mg | Engine Dynamic Balance Standard | ≤10Mg |
| IP | IP45 |
| KV | 170 | Nominal Voltage (Lipo) | 6-12S |
| Stationary Power (20V) | 0.8A | Peak current (180s) | 30A |
| Maximum Power (180s) | 1500W | Motor weight (incl. cable) | 250g |
| Internal Resistance | 115ΜΩ |
| Fashion model | ALPHA 60A 12S V1.2 |
| Supported Voltage (6S) | 18-50.4V |
| Continuous Current | 60A |
| Peak current (10s) | 80A |
| Standby Consumption | ≤50mA |
| BEC | NO |
| Throttle Position Range | 1100-1940μs |
| Throttle Refresh Rate | 500Hz |
| Accelerator response speed | 300ms |
| Mate | 78.7 x 32.5 x 16.2mm |
| Weight (incl. cables) | 73g |
| Fashion model | 20x6 inches (508mmx152.8mm) |
| Weight (Single Blade) | 47g |
| Thrust Limitation | 10kg |
| Optimal RPM | 3000-5500 RPM/min |
| Surface treatment | Polished |
| T-MOTOR Series | Integrated with 2 blades |
| Material | CF+Epoxy |