Skip to content
FAQ Contact Order Tracking Affiliate
|<none>|1005002913919730

iFlight iPower GM110-10 Gimbal Motor w/ Alexmos 32BIT BGC set

by iFlight
Sold out
€0,00 - €0,00
€0,00
€852,99
€852,99 - €852,99
€852,99

free return

Do you live in Belgium or The Netherlands? Then you can return your package for free!

Out of stock
Description
Description
  • The controller can be used to build high performance 3-axis camera stabilization systems that can be mounted on UAV and to build portable camera stabilizers. This version of the controller is our new direction in the development of stabilizing solutions. It replaces the previous 8-bit version of the SimpleBGC controller, keeping 100% back compatibility but adding the new functionality.

Characteristics
  • Board size: 50×50 mm
  • The distance between the mounting holes: 45mm
  • The diameter of the mounting holes: 3mm
  • Supply voltage: 3S to 6S
  • Maximum motor current: 1.5 A
  • 5V output current to power external devices: up to 1 A

GM110-10 gimbal motor
  • The principle of camera stabilization using direct drive brushless motors. In fact, the gimbal based on BLDC motors is very similar to the common gimbal based on hobby servo.
  • Specially designed for SLR antenna and Z axis DIY parts

Characteristics
  • Sealed housing to prevent contamination from dust and dirt.
  • Hollow shaft for slip ring
  • Configuration: 36N42P, prove more torque.
Model GM110-10
Diameter motorbehuizing Ф110±0.05mm
Motor housing height 26±0.2mm (Including encoder housing)
Diameter hollow shaft (OD) Ф25-0.008/-0.012 mm
Diameter hollow shaft (ID) Ф22+0.05/+0.1 mm
Wire length 610±3mm
AWG cable #24
weight engine 532±1g
Wire connection 2.5mm Dupont-connector
Current without load 20V
Voltage without load 0.16±0.1 A
No-load speed 292~323 RPM
Current with load 20V
Voltage with load 2a
Load torque (g) 9000-15000
Internal resistance motor 4.16Ω±5% (Resistance varies with temperature)
High voltage test DC500V 1mA @2sec
Discharge rotor housing ≤0.1mm
Rotation direction Clockwise
High-low temperature test
High temperature 100 hours at 60℃, and the motor works normally after 24 hours at room temperature
Low temperature 100 hours at -20℃, and the motor works normally after 24 hours at room temperature
Maximum power ≤80W
Work flow 4-6S
Working temperature -20~60℃;10~90%RH

 

What is included

  • 3 x GM110-10 gimbal motor
  • 1 x Alexmos 32BIT BGC kit without alum case
  • 1x Set of connection cables