Skip to content
FAQ Contact Order Tracking Affiliate
|<none>|1005002927029339

iFlight iPower GM3506 Gimbal Motor w/ AS5048A Encoder/ Alexmos 32BIT BGC set

by iFlight
Sold out
€0,00 - €0,00
€0,00
€382,99
€382,99 - €382,99
€382,99

free return

Do you live in Belgium or The Netherlands? Then you can return your package for free!

Out of stock
Description
Description
  • Encoders are special sensors that are added to each brushless motor of a Gimbal stabilizer, allowing the system to more accurately track motor position for greater stability, which in turn also increases battery efficiency.
  • What is encoder technology in brushless gimbal control system?
  • The 3-axis gimbal stabilization system that relies on both active motor-driven components and passive inertial stabilization. Passive stabilization is based on the principles of inertia (the tendency of an object to resist change in its motion) and requires the camera to be well balanced in the Pan, Tilt and Roll axes. Active stabilization refers to the techniques of using sensors to measure the Pan, Tilt and Roll movements of the camera and counter these movements using motors attached to the 3 axes.

Characteristics
  • Easy to do gimbal tuning, no need to calibrate much anymore.
  • Energy saving, 5 times long working time than gimbal without encoder system.
  • Dual IMUs.
  • Faster response, motor torque increases instantly, no more bug for difficult turning angle.
  • Encoderchip A5048a

iPower GM3506 brushless gimbal motor
  • iPower Motors' GM35 Series Motor is the ultimate brushless gimbal motor for SLRs and cameras of similar weight. This motor is designed for large-scale multi-rotor platforms that want to lift an SLR-sized gear - 1.5 kg/cm torque. The principle of camera stabilization using direct drive brushless motors. In fact, the gimbal based on BLDC motors is very similar to the common gimbal based on hobby servo.
Model GM3506
Engine Outer Diameter Ф40±0.05mm
Motor Height (incl. encoder housing) 25.8±0.2mm
Hollow Shaft (OD) F12-0.008/-0.012 mm
Hollow Shaft (ID) F8.6+0.05/0 mm
Wire length 610±3mm
AWG cable #24
engine weight 72±0.2g
Wire plug 2.5mm dupont-connector
No load current 16V
No load voltage 0.17±0.05 A
No load Rpm 2149~2375 RPM
Load flow 12V
Load voltage 1A
Tax Torque 600-1000g
Motor internal resistance 5.6Ω±5% (resistance varies with temperature)
High voltage test DC500V 1mA @2sec
Rotor housing run out ≤0.1mm
Steering (axis extension) clockwise
High-low temperature test
High temperature Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Low temperature Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Maximum power ≤25W
Work flow 2-3S
Working temperature -20~60℃;10~90%RH

 

What is included

  • 3 x GM3506 Gimbal Motor with AS5048A Encoder and Magnet
  • 1 x Alexmos 32BIT Extended BGC Board Encoder-versie
  • 1x Set of connection cables