Futaba 10PX Black Edition Transmitter

Overview

The FUTABA 10PX Black Edition is a limited edition variant of the T10PX high-end wheel transmitter. It features a black metallic black edition wheel design, a carbon-look body, and includes aluminum steering housing and brake levers for increased rigidity. It also has exclusive Black Edition features such as a logo, start-up screen, and stickers.

Features

• Black Edition Exclusive Logo, carbon-look top case
• Black Edition Exclusive Start-Up Screen
• Front Case (carbon style)
• Rear case (carbon style)
• Battery (carbon style)
• Push Switch (Chrome Metallic)
• Dial SW (Silver Metallic)
• Gray hook
• Black metal wheels
• Black anodized wheel screws
• Aluminum steering housing
• Aluminum brake lever

Full color touchscreen lcd

The T10PX features a HVGA 4.3 inch, full-color, backlit LCD touchscreen. The screen is transflective, allowing visibility both indoors and outdoors.

F-4G System & Telemetry

Equipped with an F-4G system that enables telemetry with faster response than the T-FHSS SR system.

10 channels

Up to 10 channels can be operated by using the S.BUS2 system together.

T-FHSS Miniz system

By setting the Miniz system in the receiver setting menu, you can use the Kyosho Mini-Z Evo Dedicated Receiver RA-42. Dedicated receiver RA-42 requires separate purchase.

Update software

Software can be updated via microSD card. Model data can also be saved on a microSD card. Additionally, telemetry log data can be stored.

Model memory for 40 models

Model names can use up to 15 letters, numbers, and symbols, allowing logical names to be used. A model memory with different setups can be created using the model copy function.

Paddle switch + lower switch + 3-position switch

A paddle switch near the wheel, a 3-position switch on the grip, and a lower switch at the bottom are equipped to support multiple channels and functions.

Lipo battery can be used

The optional LT2F2000B Lipo battery can be used as the power source for the transmitter. The runtime is extended.

Brake mixing for large cars

Brake mixing of the front and rear wheels of 1/5GP and other large cars can be adjusted independently.

Steering mix

Smooth turning is possible through independent left and right steering servo settings.

Mixing 4W for crawlers and other 4ws types

This function can be used with crawlers and other vehicles with 4-wheel steering type.

Dual ESC mixing for crawlers

ESC at the front and rear is controlled independently.

Gyro mixing

The sensitivity of Futaba auto speed gyros can be adjusted from the T10PX.

Tank mixing

This function is intended for vehicles such as tanks.

CPS Mixing

LED lighting and fluid control using our CPS-1 channel power switch can be linked to steering and throttle operation only by switch.

S.Bus Servo

This is a special function that allows the parameters of our S.Bus servo to be set, whose settings are changed using PC coupling software.

Mc-link

This is a special function that allows setting the contents of the Link software which may support Futaba Speed Controller (ESC), MC960CR, MC950CR, MC850C, MC851C, MC602C, MC402CR, etc. Variable frequency and other data changes from PC on the T10PX.

Choke speed

Sudden trigger operation on a smooth road surface will only cause the tires to spin and the model will not accelerate smoothly. By setting the throttle speed work function, operation can be smooth and easy. It also suppresses battery consumption.

Steering speed

If you feel the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted.

Non-telemetry LED

When the telemetry function is to confirm that the telemetry function is not working.

Select Choose function

This function assigns functions to dials (digital trim, grip dial, button). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all dials are digital.

Select function switch

This function assigns functions to 10 switches. The operational direction can also be set.

Wheel & Trigger position can be changed

The wheel position can be set using an accessory APA wheel position adapter. The wheel angle can also be adjusted. The position of the throttle trigger can be moved forward and backward.

Rubber grip

It is possible to convert to a narrow grip type by exchanging the rubber grip.

Trim/Dial Lock functions

Lock functions that prohibit setting and operation by transmitter finishing and dials are provided.

Left-handed support

The left and right installation direction of the wheel section can be reversed.

Vibrator built into the grip

The vibrator can be operated with race timer Lap Navigation, Time-Up, Low Battery, Telemetry Alarm.