Amewi G151H Hydraulic Track Loader 1/14 PNP (Metal)
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Description
PNP
The G151H Hydraulic Track Loader is supplied with all the electronics required to operate the track loader. All you need to do is install the batteries. Batteries for the remote control are not included and must be supplied by you.
Overview
The G151H hydraulic track loader in 1:14 scale offers completely new possibilities on the construction site, at home, or in any other application area. Thanks to the boom's extensive range of movement and the massive bucket, this model combines the advantages of a conventional wheel loader with the powerful tracked drive of a bulldozer. In addition, this high-quality model is equipped at the rear with a ground rake that can easily tear up even harder soils. The entire model is made of metal and therefore has a running weight of nearly 15 kg. Combined with the high-torque 540 brushed motors on the tracked drive, perfect off-road propulsion is guaranteed. The welded steel bucket can also lift approximately 13 kg. The model itself is made of a zinc and aluminum alloy (except for the chain and bucket, which are made of steel). Heavy-duty hydraulic lines are also installed, and the pump is equipped with a brushless motor. The maximum pump pressure here is approximately 5 MPa, corresponding to about 50 bar. The average working pressure is approximately 3 MPa (30 bar), and the maximum lifting height is 403 mm with a maximum load of 13 kg.
Features
- Welded steel bucket and fixed ground rake for loosening compacted soil.
- Complete LED lighting and sound can be switched on and off from the transmitter
- All doors and hatches can be opened, including the removable driver's cab
- Zinc alloy and cast aluminum (except the chain and hydraulic pump).
- Reliable brushless hydraulic system with adjustable pump
- Max. pump pressure: approx. 50 bar
- Working pressure: approx. 30 bar
- Max. lifting capacity: approx. 13 kg
- 10-channel transmission system already installed
- Hydraulic oil included
| Scale | 1:14 |
| Overall length | 627 mm |
| Width | 220 mm |
| Height | 278 mm |
| Weight | Approx. 15 kg |
| Body | Zinc and aluminum alloy |
| Bucket | Welded steel |
| Chassis | Steel |
| Max. height with bucket extended | 403 mm |
| Track length | 309 mm |
| Track wheelbase | 218 mm |
| Ripper length | Approx. 130 mm |
| Pump output | Approx. 800 ml/min |
| Nominal pump pressure | 3 MPa / 30 Bar |
| Max. pump pressure | 5 MPa / 50 Bar |
| Max. lifting capacity | Approx. 13 kg |
| Battery compartment dimensions | 140x35x43 mm |
| Connection | XT60 |
| Driving time with, e.g., 5200mAh | Approx. 35 min |
| Built-in LED lighting system | Yes |
| Built-in sound module | Yes |
| Transmitter | 2.4 GHz, 12 channels, pre-installed |
| Receiver | 10 channels, pre-installed |
What's included
- Model
- Transmitter
- Hydraulic oil
- Filling bottle
- Spare chain links
- USB cable
- Instructions DE/EN
What else is needed
- 4x AA Mignon 1.5V batteries for the transmitter
- 3S 11.1V LiPo battery, max. dimensions: 140x35x43mm, XT60 connector
- Charger