Gmade GS02 TS Chassis Kit 1/10

Features

Steel ladder frame - The GS02 frame is designed to look like a real car chassis and the frame material is made of high-quality steel, C-channel side rails, and is bolted with an Allen key with crossbars, making it resistant to twisting or warping.
Additionally, the steel parts are coated with black powder to prevent rust.

Adjustable wheelbase - The GS02 chassis allows three types of conversion kits for easy adjustment of the wheelbase, so you can use any type of custom body from 300, 313, and 324 mm.

Front weight distribution - The BOM weight distribution system is designed to be placed at the front of the car.
This increases the grip of the tire on the front wheel, allowing the car to crawl better on rocks with a steep slope. It also improves driving performance when climbing hills. Furthermore, it minimizes the chance of the car tipping over when climbing.

Chassis-mounted servo system with panhard rod - The BOM steering system has a steering servo on the frame, just like a real 1:1 car.
It is designed to approach the 'zero bump steer' movement as closely as possible, so there is no 'bump steer' movement caused by the front wheel suspension.
Ultimately, we have maximized the vehicle's steering performance.
Moreover, the Panhard rod is designed so that there is no interference with nearby parts, allowing the front suspension and shock absorbers to move freely without loss.

Waterproof receiver box - The waterproof receiver box protects the receiver from water, mud, and snow.

Battery tray - The battery can be easily replaced and accommodates up to 7,600 mAh 2-cell Lipo batteries or 5,000 mAh 3-cell Lipo batteries (7,600 mAh 2-cell Lipo or 5,000 mAh 3-cell Lipo).

Dustproof electronics box - Protects electronic equipment such as winch controllers and BEC, which are often used for weighing trucks, from foreign substances.

Skid Plate - The skid plate protects the transmission and other important components with its flat surface, allowing the BOM to easily slide and drive over rocks and other obstacles.

Drive lines - The drive lines of the front and rear axles are placed in a straight line to reduce fatigue stress on the driveshaft and limit power loss by providing efficient drive lines.

Torque Twist Reduce transmission - The TTR transmission is designed to drive in a stable position without disturbing the balance of the transmitted power on the axle.
The front and rear driveshafts based on the transmitter each rotate clockwise and counterclockwise. This compensates for the forces acting on the opposite rotational forces due to action (torque) and reaction (reverse torque), allowing this vehicle to drive in an extremely stable state.

Dual slipper clutch - The slipper blocks are designed to keep the gears even, allowing for more precise adjustment.

Hardened carbon steel universal joints - The front and rear cross axles of the steel couplings provide a smooth and stable drivetrain.
The set also includes spare parts that allow you to adjust the length of the universal shaft.

2-Speed Hi/Lo parts (GM30099) - The first gear is suitable for hardcore rock crawling, while the second gear allows you to quickly drive to your next crawl and climb destination.

Easy adjustable motor mount - You can easily replace and install the motor gear to change the gear ratio.

GA44 axle: the axle is specially designed for the hardcore rock crawler.
The axles are made of very strong materials and when a 4-link suspension is added, the vehicle performs off-road like a real 1:1 vehicle.
The GA44 axle housing is a double, one-piece type.
The angle of the differential cover is designed to reduce the risk of damage in a frontal collision and is therefore very suitable for off-road driving.

SD Scaler shock absorber - is a coil spring shock absorber optimized for weighing trucks.
The oil in the shock absorber minimizes splash during driving and provides a very durable aluminum shock absorber housing with extra 3.5 mm heavy shock absorber shafts. These help you when driving roughly on rough surfaces.
Beginners can also easily mount this shock absorber and change the settings. Thanks to the adjustable nut, you can also easily adjust the ride height, allowing you to quickly change your car's settings even if driving conditions change.

Required (not included)

• Radio controller
• Motor
• Servo
• 7.2V battery
• ESC
• Receiver
• Body
• Wheel set