iFlight iPower GM5208-12 Gimbal Motor w/ AS5048A Encoder
by iFlight
Original price
€0,00
-
Original price
€0,00
Original price
€0,00
€107,99
€107,99
-
€107,99
Current price
€107,99
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
In stock at supplier
Description
Description
- iPower Motors' GM52 series motor is the ultimate brushless gimbal motor for DSLR/CANON 5D MARKII, MARKIII cameras.
- This motor is designed for large-scale multi-rotor platforms that want to lift Red Epic and DSLR sized gears - 4 kg/cm of torque.
- The principle of camera stabilization using direct drive brushless motors. In fact, the gimbal based on BLDC motors is very similar to the common gimbal based on hobby servo.
| Model | GM5208 |
| Engine outer diameter | Ф63±0.05mm |
| Car height | 30.7±0.2mm (including encoder housing) |
| Hollow shaft (OD) | Ф15-0.008/-0.012 mm |
| Hollow axis (ID) | F12+0.05/0 mm |
| Wire length | 610±3mm |
| AWG cable | #24 |
| engine weight | 209±0.5g |
| Wire connector | 2.5mm dupont connector |
| No load current | 20V |
| No load voltage | 0.09±0.1 A |
| No load RPM | 456~504 RPM |
| Load current | 20V |
| Load voltage | 1A |
| Tax torque | 1800-2500 g |
| Internal resistance of the motor | 15.2Ω±5% (resistance varies with temperature) |
| High voltage test | DC500V 10mA @1sec |
| Rotor housing runout | ≤0.1mm |
| Steering (axle extension) | clockwise |
| High-low temperature test | |
| High temperature | Keep at 60℃ for 100 hours and the motor can work normally after 24 hours at room temperature |
| Low temperature | Keep at -20℃ for 100 hours and the motor can work normally after 24 hours at room temperature |
| Maximum power | ≤40W |
| Work flow | 3-5S |
| Working temperature and humidity | -20~60℃;10~90%RH |