iFlight iPower GM8112 Gimbal Motor
by iFlight
Sold out
Original price
€0,00
-
Original price
€0,00
Original price
€0,00
€209,99
€209,99
-
€209,99
Current price
€209,99
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Out of stock
Description
Description
- The GM8112 motor from iPower Motors is the ultimate brushless gimbal motor for Red Epic / Large Cameras. This motor is designed for large-scale multi-rotor platforms that want to lift Red Epic and DSLR sized gears - 6 kg/cm of torque. The principle of camera stabilization using direct drive brushless motors. In fact, the gimbal based on BLDC motors is very similar to the common gimbal based on hobby servo.
| Model | GM8112 |
| Motor Out Diameter | Ф89.5±0.05mm |
| Engine Height | 26±0.2mm (Including encoder housing) |
| Hollow Shaft (OD) | Ф25-0.008/-0.012 mm |
| Hollow Shaft (ID) | Ф22+0.05/+0.1 mm |
| Wire length | 610±3mm |
| AWG cable | #24 |
| engine weight | 428±1g |
| Wire plug | 2.5mm dupont-connector |
| Stationary current | 22V |
| Stationary voltage | 0.3±0.1 A |
| Idle speed | 380~420 RPM |
| Load current | 20V |
| Load voltage | 2a |
| Tax Torque | 6000-9000 |
| Motor internal resistance | 4.2Ω±5% (resistance varies with temperature) |
| High voltage test | DC500V 1mA @2sec |
| Rotor housing outlet | ≤0.1mm |
| Steering direction | clockwise |
| High-low temperature test | |
| High temperature | Keep at 60℃ for 100 hours and the motor can work normally after 24 hours at room temperature |
| Low temperature | Keep at -20℃ for 100 hours and the motor can work normally after 24 hours at room temperature |
| Maximum power | ≤80W |
| Work flow | 3-5S |
| Working temperature | -20~60℃;10~90%RH |