Skip to content

iFlight Chimera7 Pro V2 HD 7.5" 6S LR Drone W/ O3 Air Unit FPV PNP

by iFlight
Original price €0,00 - Original price €0,00
Original price €0,00
€2.207,99 - €2.222,99
Current price €2.207,99

free return

Do you live in Belgium or The Netherlands? Then you can return your package for free!

in stock, ready to be shipped
in stock, ready to be shipped
Choose a variant to show shipping times


Smooth and powerful XING2 motors
The latest upgrade of our bestselling XING motors, no compromises made! Durable unibell technology (one-piece bell), strong titanium alloy shaft with reinforced bell joint, crash-resistant 7075 aluminum bell, smooth and durable Japanese NSK bearings, N52H curved arc magnets with center slot, and our XING O-ring bushing opening protection.

Latest Nazgul frame for maximum protection
Gone are the old days, every time you crash your electronics are full of dirt and wet grass. Our latest frame reduces contamination that can build up on your flight controller or ESCs, preventing failures or short circuits. Strategic airflow to keep your components cool and clean without compromising weight or performance. Illuminated side panels and 360 degree TPU protection parts.

DJI O3 HD Air Unit low latency digital transmission
Up to 10 km video transmission range, enjoy a clear and smooth real-time image in your glasses even in environments with interference. (Source DJI)

4K stabilized video with 155° ultra-wide angle
Together with high-quality image performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI)

Secure battery plug with anti-spark filter
Connecting a battery can cause a loud spark at the connector, which is caused by the high battery current flowing into the low ESR capacitor first and filling up the ESC capacitance. We've added a protection circuit to extend the life of XT60 connectors and prevent rapid voltage or current spikes that can protect your electronics from damage.

Specially designed heat sink for DJI O3 HD Air Unit
Improved cooling performance for the high power consumption of the DJI O3 video transmitter. We added a custom CNC heatsink for excellent heat dissipation without overheating, even at high power levels.

GPS pre-installed for greater remote security
GPS functionality to find your way back and Betaflight GPS Rescue mode ready to set up (default OFF to avoid unexpected behaviour; installation instructions included). Custom iFlight 100mm LR antenna for the best signal coverage, even at long ranges.

Video transmission

  • Model: DJI O3 Air Unit
  • Communication frequency: 2,400-2,4835 GHz (RX only) / 5,725-5,850 GHz (RX and TX)
  • Communicatiebandbreedte: max. 40 MHz
  • Live View quality and latency
With DJI FPV Goggles V2
  • 810p/120fps Video transmission quality: The latency of the video transmission is lower than 28 ms.
  • 810p/60fps Video transmission quality: The video transmission latency is lower than 40ms.
With DJI Goggles 2
  • 1080p/100fps video transmission quality: The video transmission latency is only 30ms.
  • 1080p/60fps video transmission quality: The video transmission latency is only 40ms.
  • Maximum video transmission bit rate: 50 Mbps
  • Max. video transmission range: 10 km (FCC), 2 km (CE), 6 km (SRRC) Audio transmission: n.v.t.
  • Model: Commando 8 ELRS-radio
  • Weight: 310g (±10g)
  • Dimensions (LxWxH): L 190 x W 150 x H 51 mm
  • Communication frequency: 5.725-5.850 GHz
  • Zendvermogen (EIRP): 2,4 GHz: FCC: 27 dBm; CE: <14dBm; SRRC: <19 dBm 915MHz:FCC: 30 dBm; CE: <14dBm; SRRC: <19 dBm
  • Operating current/volt: 0.6 A at 7.6 V
  • Charging time: 1 hour and 30 minutes
  • Operating Time: Approx. 8 o'clock
  • Operating temperature range: 0°C to 40°C (32°F to 104°F)
  • Charging temperature range: 5°C to 40°C (41°F to 104°F)
  • Model: DJI-bril 2
  • Weight: Approx. 290 grams (including headband)
  • Dimensions (L × W × H): L167 * W1039 * H 813mm
  • Screen size (single screen): 0.49 inch
  • Resolution (single screen): 1920×1080
  • Refresh rate: up to 100 Hz
  • Eye relief range: 56-72mm
  • Diopter adjustment range: -8.0 D to +2.0 D
  • FOV (single screen): 51°
  • Communicatiefrequentie: 2.400-2.4835 GHz; 5.725-5.850 GHz
  • Zendvermogen (EIRP): 2,4 GHz: < 30 dBm (FCC), < 20 dBm (CE/SRRC/KC) 5,8 GHz [4]: < 30 dBm (FCC), < 23 dBm (SRRC), < 14 dBm ( CE/KC)
  • Maximum video transmission bit rate: 50 Mbps
  • Operating temperature range: 0° to 40° C (32° to 104° F)
  • Power consumption: 7-9 V (1.5 A)
Model Chimera7 Pro V2 6S HD
FC (flight controller) BLITZ F722 Flight Controller
ESC BLITZ E55 4-IN-1 2-6S 55A ESC
Video transmission DJI O3 Air Unit
Frame 327 mm wheelbase
Motor The XING2 2809 engine
Propeller 7,5X3,7X3 propellers
Weight 695 gram
Takeoff weight About 750g
Dimensions (L x W x H)
Diagonal distance 120 mm
Maximum ascent rate 6 m/s (Normal mode, Sport mode)
Maximum rate of descent 6 m/s (Normal mode, Sport mode)
Maximum speed 27 m/s (Manual mode)
Maximum takeoff altitude 7000 m
Maximum hover time About 30 minutes
Maximum flight distance 18 km
Maximum wind speed resistance 130 km/h (level 5)
Operating temperature range -10° to 40° C (14° to 104° F)
Transmission power (EIRP) FCC: <33 dBm / CE: <14 dBm / SRRC: <30 dBm
Antennas Dual antennas
GNSS GPS + Galileo

What's included 1x Chimera7 Pro V2 HD
1 x Commando 8 ELRS-radio
1 x DJI Bril 2
2 x Anna
2 x battery strap