Skip to content

iFlight BLITZ F7 45A 2-6S Stack

by iFlight
Sold out
Original price €0,00 - Original price €0,00
Original price €0,00
€241,99
€241,99 - €265,99
Current price €241,99

free return

Do you live in Belgium or The Netherlands? Then you can return your package for free!

Out of stock
Out of stock
Choose a variant to show shipping times
Choose a variant

Description

Characteristics
  • Improved circuit design, better components and less electrical noise!
  • DJI HD VTX connector (Plug-and-Play / no soldering required)
  • FC indicator LEDs for visual troubleshooting
  • Met LC-filter
BLITZ F7 V1.1 Flight Controller
MCU STM32 F722
Gyro BMI270
Barometer DPS310
OSD Chip AT7456E
Flash 32 MB (Blackbox-flash)
UARTS 6
Motor outputs 4x (SH1.0 connector)
I2C-serial SDA / SLA-pads
Smartaudio / IRC Tramp VTX protocol supported
LED-controller And
Beeper-pad And
Firmware target IFRC-IFLIGHT_BLITZ_F722
Montagepatroon 30.5 x 30.5 mm / 4 mm PCB-gatdiameter
Dimensions 36.5 x 35 mm
Weight 7.8 g


Wiring suggestion

  • UART 1 for VTX HD / Analog
  • UART 2 for a receiver
  • UART 3/4/5 for GPS or other sensors that require a serial port
  • UART 6 for ESC telemetry

Tips

  • 1. F722 MCU has an internal inverter.
  • 2. SBUS、CRSF、ELRS、IBUS、DSM ETC... can be connected to any unused UART_RX, we suggest you connect to Uart_RX2
  • 3. Frsky SmartPort, Tramp & Smartaudio can be connected to any unused UART_TX, we suggest you connect to Uart_TX1
  • 4. F.port can be connected to any unused UART_TX, we suggest you connect to Uart_TX2
BLITZ E45S 4-IN-1 2-6S ESC
Support DShot150/300/600/MultiShot/OneShot etc.
assembly gate 30.5 x 30.5 mm / Φ4 mm
Supports 2-6S liposuction
Telemetry output Nee
Goal QH-40 16.7
Current sensor And
Constant current 45 amps
Flow assessment 200
Burst 55 amps
Weight 14.7 g
MCU BB21
BEC Nee


Characteristics

  • Stable output power
  • 4 power levels up to 1600mW
  • 40 channels (including Raceband)
  • Fast frequency locking, no startup interference with other pilots
  • Built-in output power self-check function
  • VTX telemetry with IRC Tramp protocol
Tips
  • VTX is set to 25mW by default! Power levels above 25mW require a HAM license or local authority approval! Make sure you are flying legal frequencies and use our prepared Betaflight VTX tables for your area.
BLITZ 1.6W VTX adjustable
Input voltage 7V~36V
Interface MMCX
Power levels PIT/25mW/400mW/800mW/1600mW
Channels 40 (including Race Tire)
Montagepatroon 30.5 x 30.5 mm / Φ3
lightweight 18.9 g (excluding antenna)
VTX telemetry IRC Tramp
Betaflight IRC Tramp Configuration Download the attached VTX table for Betaflight!
All VTX tables can also be found here LINK
IRC Tramp VTX-tabelwaarden 25mW/400mW/800mW/1600mW


What's included:

  • 1 PC X BLITZ F7 V1.1 FLIGHT CONTROLLER
  • 1PC BLITZ E45S 4-IN-1 2-6S ESC
  • 1PC X BLITZ 1.6W VTX Adjustable
  • 1 SET X SILICON TRANSMITTERS
  • 1SET X WIRING HARNESS FOR F7 FLIGHT CONTROLLER