iFlight Defender 25 F7 AIO
by iFlight
Original price
€0,00
-
Original price
€0,00
Original price
€0,00
€214,99
€214,99
-
€219,99
Current price
€214,99
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
In stock at supplier
In stock at supplier
Description
Description
- This is the new generation F7 AIO designed for Defender 25. A future proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight etc. Lightweight, minimal size, minimal work . Solder your motor wires on and let's go!
- 1. This AIO without OSD chip is only made for Defender 25 HD VTX.
- 2. Larger size than the BLITZ Whoop BGA F7 AIO.
- Pass-through DJI O3 en Caddx Vista/Polar Connector
- MCU: STM32F745, 216 MHz
- Gyro: ICM42688P
- OSD: NEE
- Blackbox: 32 MB built-in flash
- Gyro: DPS310
- Weight: 12.8g ± 0.2g
| FC | |
| MCU | STM32F745 |
| Gyro | ICM42688P |
| black box | 32MB Onboard Flash |
| BEC output | 5V 2.5A |
| WS2812 LED Strip | And |
| Buzzer | And |
| Barometer | DPS310 |
| Connector | SH1.0 to Type-C adapter |
| OSD | N/A (HD VTX-versie) |
| FC Firmware | IFLIGHT_BLITZ_F7_AIO |
| Montagepatroon | 25,5*25,5mm φ3mm |
| Dimensions | 32,5*32,5mm |
| Input voltage | 2-6S, supports LIHV batteries |
| Smart audio / IRC | Tramp VTX protocol supported |
| ESC | |
| ESC MCU | STM32G071 |
| Driver | FD6288 |
| Input voltage | 2-6S, support LIHV battery |
| output current | 20A, peak value 30A (10 seconds) |
| ESC firmware | IFLIGHT_BLITZ_G071_01 |
| Current sensor | ratio 200 (1/10mV/A) |
| BEC | Nee |
| ESC-telemetry | Yes (PCB routed, UART6 set up for telemetry) |
| Bidirectional DShot | And |
| Support DShot | DShot150/300/600/MultiShot/OneShot, enz. |
What's included
- 1 x Defender 25 BLITZ F7 AIO
- 1 x Capacitor 470uF/35V (Onboard)
- 1 x XT30U Male 18AWG cable 70mm
- 1 x 1.0-7P cable 50mm-28mm
- 1 x 1.0-7P cable 50mm
- 4 x M2 silicon grommets