iFlight iPower GM6208-150T Gimbal Motor
by iFlight
Sold out
Original price
€0,00
-
Original price
€0,00
Original price
€0,00
€105,99
€105,99
-
€105,99
Current price
€105,99
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Out of stock
Description
Description
- iPower Motors' GM62 series motor is the ultimate brushless gimbal motor for DSLR/CANON 5D MARKII, MARKIII cameras. This motor is designed for large-scale multi-rotor platforms that want to lift Red Epic and DSLR sized gears - 4 kg/cm of torque. The principle of camera stabilization using direct drive brushless motors. In fact, the gimbal based on BLDC motors is very similar to the common gimbal based on hobby servo.
| Model | GM6208 |
| Engine outer diameter | Ф69.5±0.05mm |
| Car height | 24±0.2mm (Including encoder housing) |
| Hollow shaft (OD) | Ф25-0.01/-0.015 mm |
| Hollow axis (ID) | Ф22+0.05/+0 mm |
| Wire length | 610±3mm |
| AWG cable | #24 |
| engine weight | 249±0.5g |
| Wire plug | 2.5mm dupont-connector |
| No load current | 20V |
| No load voltage | 0.08±0.1 A |
| No load RPM | 209~231 RPM |
| Load current | 20V |
| Load voltage | 1.2A |
| Load torque (g) | 2600-3600 |
| Motor internal resistance | 32Ω±5% (resistance varies with temperature) |
| High voltage test | DC500V 1mA @2sec |
| Rotor housing loopuit | ≤0.1mm |
| Rotation (axis extension) | clockwise |
| High-low temperature test | |
| High temperature | 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature |
| Low temperature | -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature |
| Maximum power | ≤25W |
| Work flow | 3-5S |
| Working temperature | -20~60℃;10~90%RH |