Skip to content

Meteor65 Pro Brushless Whoop 2023 FPV Drone BNF

by BetaFPV
Original price €0,00 - Original price €0,00
Original price €0,00
€200,99 - €279,99
Current price €200,99

free return

Do you live in Belgium or The Netherlands? Then you can return your package for free!

in stock, ready to be shipped
in stock, ready to be shipped
in stock, ready to be shipped
in stock, ready to be shipped
in stock, ready to be shipped
in stock, ready to be shipped
Choose a variant to show shipping times
Choose a variant


The Meteor65 Pro does not come with transmitter and FPV goggles. You must purchase it separately.


  • Using the latest 0802SE 19500KV motors and 35mm 3-blade propellers, this kit gives you a completely different experience of high-performance indoor flight.
  • Built-in ultra-light weight of 1.52g and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones.
  • Adopted with injection molding technique, this canopy is 1.60g ultra light weight and is more durable, anti-ruin and heat resistant, providing good protection for the whoop drone.
  • Reserve two UART ports on the F4 1S 5A FC board (SPI Frsky). The Frsky version can also be used as a PNP version. Therefore, pilots can connect the external receiver to it.
  • F4 1S 5A FC (Serial ELRS 2.4G) is flexible to upgrade and has great potential. It supports being upgraded to ELRS V3.0 separately without flashing Betaflight flight controller firmware.
  • The different colors of the spare parts, including the 65 Pro 65mm frame, micro-canopy and propellers, provide pilots with more choices. By using them with BETAFPV waterslide decals, pilots can easily create and build their own unique whoop drones.

Meteor65 Pro-frame en 35 mm propeller

  • Meteor65 Pro frame has the same perfect performance as the popular Meteor65 frame. The lightest 65mm lower profile frame for 35mm propellers. The battery slot is closer to the center of gravity for a smoother flying experience and you land on the motor propellers instead of the battery.


  • BETAFPV exclusively designed BT2.0 connector has broken the bottleneck of PH2.0 connector. BT2.0 connector has a reduced internal resistance of the connector, effectively allowing more current to be transferred, which means it supports 9A continuous current (15A burst). This means stronger power and longer flight time on 1S brushless drones, while the PH2.0 only supports 4.5A. You can enjoy more flight time without disturbing the low voltage warning due to the reduction of voltage sag. For more instruction.

Flight controller and ESC

  • The latest F4 1S 5A flight controllers are applied to all BNF versions of Meteor65 Pro. It features serial ELRS 2.4G instead of SPI ELRS 2.4G for the ELRS version compared to the previous version. The Frsky version reserves two UART ports for the available external receiver so that it can be used as a PNP and switched to the Futaba SFHSS protocol via the Betaflight configurator. The ESC on the new board, powered by BB51 hardware instead of BB21, comes with Bluejay 96k ESC firmware, enabling 0802SE 19500KV motors to take full advantage of power efficiency. We update the gyro to BOSH BMI270 for better performance and stability since the new F4 1S 5A FC.


  • C03 FPV Micro Camera is 1.52g ultra light and a great camera for indoor micro FPV quadcopters. It features 1200TVL definition with 1/3" CMOS sensor, 2.1mm lens for 160° FOV and excellent latency, ensuring high quality, clear and sharp images through your glasses.

The engine

  • 0802SE 19500KV Motor motor is a lightweight 1S motor, compared with 0802 series brushless motors, it is not only significantly less weight, which is only 1.88g/piece, but also provides excellent performance of power and thrust. It provides the perfect dynamic balance, which gives the drone more flexibility and longer flight time.
Model Meteor65 Pro 1S Brushless Whoop (2022)
Weight 23.01g (without battery)
FC&ESC F4 1S 5A FC (Serial ELRS 2.4G)/F4 1S 5A FC (SPI Frsky)
Frame Meteor65 Pro 65mm 1S Brushless Frame
The engine 0802SE 19500KV Motor
Propellers 35mm 3-blade propellers (1.0mm as)
Camera C03 FPV Camera
Tilt 30° (standard)/20° (optional)
VTX M03 25-350mW VTX
Canopy Canopy for Micro Camera / Canopy for Micro Camera 2022 Version
Battery BT2.0 300mAh 1S battery
Flight time 4.5 minutes


Recommended Parts
Radio Transmitter LiteRadio 3 Pro, LiteRadio 3, LiteRadio 2 SE
FPV April VR03 FPV-april, VR02 FPV-april
Battery BT2.0 300mAh 1S battery
Propellers 35mm 3-blade propellers (1.0mm as)
Colorful Frame Meteor65 Pro 65mm 1S Brushless Frame
Colorful Hood Hood for Micro Camera 2022
Sticker BETAFPV Waterslide Decals
Charger 6 Ports 1S Battery Charger & Adapter
BT2.0 Series Accessories

What's included

  • 1 * Meteor65 Pro Brushless Whoop Quadcopter (1S)
  • 2 * 300mAh 1S 30C battery with BT2.0 connector
  • 1 * BT2.0 battery charger and voltage tester
  • 1 * Type C USB-kabel
  • 1 * Customized carrying case
  • 1 * Spare 35mm 3 Blade Props (1.0mm Shaft)
  • 1 x screwdriver
  • 3 * Decorative parts
  • 1 * 20° Lens Camera Mount for C03 Camera
  • 1 * 30° Lens Camera Mount for C02 Camera